A library for designing the interface for Human Machine Interface displays.
This library is incredibly WIP at the moment. If you have any feedback or criticism for the app, that would be appreciate! Also feel free to contribute, if you would like to. You can see the TODO list near the bottom
Motor ON button changes its text based on the visible pressed state, using Avalonia styles only. Other buttons are visibly pressed only by the ReadVariable property. The numeric entry with the PWM Freq text has a ReadVariable for a short number
Clone the project using the command
git clone --recursive https://github.com/AngryCarrot789/JetTechMI
You should then be able to build and run without problem. If you want to build and upload the project to, for example, a raspberry PI, you can follow these commands. You will need 2 terminals open
On Raspberry PI:
SSH into it:
ssh <username>@<address>
Delete any existing old app version files:
rm /home/<username>/JetTechMI/* -r
On windows:
CD into the project directory and run build command:
dotnet build -c Debug -r linux-arm64 -p:PublishReadyToRun=true -p:PublishSingleFile=true -p:PublishTrimmed=true --self-contained true -p:IncludeNativeLibrariesForSelfExtract=true
Copy files from windows to raspberry pi via SCP:
scp -r bin\Debug\net8.0\linux-arm64\* <username>@<address>:/home/<username>/JetTechMI
On Raspberry PI:
Setup permissions for application file
sudo chmod +x /home/<username>/JetTechMI/JetTechMI
Run the executable with --drm parameter for avalonia:
/home/<username>/JetTechMI/JetTechMI --drm
For running the app when the Rasp PI boots, this is a bodged workaround but it works:
Open the bash profile file:
sudo nano ~/.bash_profile
Then add this line:
/home/<username>/JetTechMI/JetTechMI --drm
The idea was that for each control there would be an instance of IJtControlData which would be used
to implement the updating and batched data requests of a specific control. The JtButton class is one example.
Controls are added to and removed from the JtControlManager global instance, which is what deals with the update loop
and also deals with the batched update system.
The global JetTechContext instance is your PLC registry, which is where requests can be made to your PLC
When using a page system, it's important to unregister controls that are no longer visible, so that they do not take part in the update tick and affect performance. I will try and work on an automatic system for this
For buttons, use JtButton. It has a ReadVariable (which determines the visible pressed state), a WriteVariable (which is used
to write the physical pressed state) and the EnablingVariable which is what either enabled or disabled the button (none present means always enabled).
There's also the ButtonMode which is what lets the button behave as a Set, Reset, Toggle or Push button (rather than having separate controls for each)
Feel free to contribute whatever you want if you think it'll make the editor better!
All source files in JetTechMI are under the GNU General Public License version 3.0 or later (GPL v3.0+).
JetTechMI uses a fork of HslCommunication-Community which is a submodule.
This project also uses libraries that have other licences, such as MIT/LGPL licences.
If any source file is missing a copyright notice, it is assumed to be licenced under the same licence as JetTechMI